Networkable Thermostat Upgrade Ecobee

Networkable Thermostat Upgrade Ecobee

Networkable Thermostat Upgrade Ecobee (P/N 27310). Use this upgrade to connect to the Ecobee SmartThermostat (sold separately) via 24V thermostat wiring and control your CellarPro cooling unit through the Wi-Fi enabled Ecobee thermostat. This upgrade must be purchased at the same time as the cooling unit. It cannot be added after the cooling unit has shipped.

The CellarPro cooling unit includes 10 feet of low voltage 4-lead 18-gauge wiring to connect to the Ecobee thermostat. If you'd like more than 10 feet of wire, let us know when you checkout in the "special instructions" field. We charge $0.50 per foot after the first 10 feet.

The Ecobee SmartThermostat with SmartSensor can be installed inside or outside the cellar. To install outside the cellar, the wireless remote SmartSensor must be activated and placed inside the cellar. Note that a time lag of up to 15 minutes exists when the remote sensor is used, and it cannot record cellar humidity.

Ecobee thermostats incorporate temperature control and humidity display in an attractive, backlit, easy-to-install, wall-mounted unit. Key features include:

• Wi-Fi Internet connectivity for monitoring, management, and configuration (requires secure customer internet access)
• Personalized web portal and smartphone apps available
• Simple program editing and preferences
• Set up alerts and service reminders, including air filter monitor, over or under temperature, high humidity, or customer-selected contact closure

Please note:

The networkable thermostat upgrade is compatible with the following CellarPro models:

• 1800XTSr cooling units
• All VS Series cooling units
• All Wall-Mount and Recessed Ceiling Mount cooling units
• Air Handler AH6500 and AH8500 cooling units (AH12Sx, AH18Sx and AH24Sx cooling units already include the upgrade)
• Except for our Air Handler cooling units, the networkable thermostat upgrade should not be used with cooling units that will be ducted on the cold-side
• The bottle probe is not compatible with the networkable thermostat upgrade
• The upgrade must be purchased at the same time as the cooling unit. It cannot be added after the cooling unit has shipped.
• For service and support of the thermostat, contact Ecobee directly at 1-866-518-6740. Available on the following CellarPro models:
  • 1800H Houdini cooling unit
  • All VS Series cooling units
  • All Split Series cooling units (except ceiling mount units)
  • AH6500 and 8500 cooling units without Integrated Humidity and Heating upgrades
  • AH18, AH24 and AH30 air handlers do not need this kit to use the Ecobee4 Pro thermostat

  Available on the following CellarPro models:

  • 1800H Houdini cooling unit
  • All VS Series cooling units
  • All Split Series cooling units (except ceiling mount units)
  • AH6500 and 8500 cooling units without Integrated Humidity and Heating upgrades
  • AH18, AH24 and AH30 air handlers do not need this kit to use the Ecobee4 Pro thermostat

Specifications

Brand: CellarPro

Weight: 1 lbs

Features

• Kit allows listed CellarPro cooling units to be connected to Wi-Fi enabled Ecobee SmartThermostat (sold separately)
• Ecobee thermostat provides Internet connectivity via Wi-Fi for monitoring, management and configuration of the CellarPro cooling unit (requires secure Wi-Fi internet access)
• Personalized web portal and smart phone apps available
• Simple program editing and preferences
• Set up alerts and service reminders, including air filter monitor, over or under temperature, high humidity, or customer selected contact closure
• For service and support of the thermostat, contact Ecobee at 1-866-518-6740

Manuals & Guides

Installation Guidelines for Networkable Display Control
Ecobee Thermostat Settings
Ecobee SmartThermostat Owner Manual

Reviews