CellarPro Houdini Cooling Unit 1/2 Ton 3400H-ECX #35856
CellarPro Houdini Cooling Unit 1/2 Ton 3400H-ECX #35856
CellarPro 3400H-ECX Cooling Unit (P/N 35856). NOW WITH ENERGY-EFFICIENT EC FANS! CellarPro engineered the 3400H-ECX cooling unit specifically for shallow-depth glass wine cellars.
Just 13 inches deep and 14 1/2 inches tall, the 3400H-ECX Houdini cooling unit is designed to "disappear" inside—or atop—the cellar. Dual independent variable-speed fans offer flexibility to choose between super-quiet operation and maximum performance.
For example, assuming 75F ambient temperature, R13 insulation in the non-glass walls, and no ducting, the 3400H-ECX would work in the following cellars:
Cellar Dims |
Cellar Cu Ft |
Glass Sq Ft |
Glass Pane |
Cellar Temp |
BTUH |
||
| 13'w x 2 1/2'd x 9'h | 293 | 117 (Front Wall) | Single | 60F | 3460 | ||
| 15'w x 2 1/2'd x 10'h | 375 | 150 (Front Wall) | Double | 55F | 3308 | ||
| 15'w x 2 1/2'd x 10'h | 375 | 200 (Front Wall) | Double | 58F | 3326 |
"All air-cooled refrigeration equipment requires fresh air intake to dissipate the heat generated by the cooling unit. The fresh air intake CANNOT come from the wine cellar space - it must come from the space outside the cellar."
Variable-speed fans with independent control provide maximum flexibility and versatility, as follows:
Variable fan speed for the cold side- Provides cooling flexibility
- Low fan speed: 2737 BTUH @ 55F / 47F lowest achievable cellar temperature
- High fan speed: 3492 BTUH @55F / 47F lowest achievable cellar temperature
- Choose between performance vs noise
- Low fan speed: 56 dBA / 85F maximum intake temperature
- High fan speed: 61 dBA / 95F maximum intake temperature
Powerful fans on the 3400H-ECX allow the cooling unit to be ducted without the need for an auxiliary fan, as follows:
- Up to 100 equivalent feet (50' per duct) with 8-inch insulated ducting
- Intake from the bottom, left, front, or top/exhaust from the bottom, front, or top
- Up to 100 equivalent feet (50' per duct) and 85F maximum intake temperature (no auxiliary fan required)
- Up to 200 equivalent feet (100' per duct) and 95F maximum intake temperature (requires auxiliary fan)
- Intake from the right, front, or top/exhaust from the front, rear, or top
- High fan speed is required for ducted airflows
- CellarPro OEM duct hoods (sold separately) must be used to preserve the manufacturer's warranty
- The probe must be located inside the cellar
- We recommend using the probe filled with water and 10% rubbing alcohol to keep the water from developing mold
- The bottle with the probe should be located in the top third of the cellar, in a central location with good airflow. (i.e., not buried in the back nor a corner)
Specifications
Brand: CellarPro
UPC: 077757358562
Size: 46w x 13d x 14 1/2h (in)
Power/Rating:
115V AC / 60 Hz
Compressor Amps:
- Startup (LRA): 40.0 Amps
- Unit Amp Rating: 10.26 Amps
- Total Watts with Fans on High: 807
- Total Watts with Fans on Low: 791
- Compatible with Dedicated 15-Amp Circuit
BTUH @ 55F:
- Low Fan Speed: 2737 BTUH
- High Fan Speed: 3492 BTUH
- 1/2 Ton Nominal
Sizing Table: Click here to view sizing table
Features
- Features energy-efficient EC Fans on both the cold and hot sides
- This unit can be configured to pull fresh air ranging from -20 to 95F. If the unit's location does not provide sufficient room for the unit's exhaust to dissipate and/or fresh air to be provided, you may need to purchase a rear duct kit. We recommend the addition of a fan cycling switch when fresh air intake will be below 20F.
- The unit must be placed indoors in an area that is above 32F.
- Dual high-output fans come with independent variable speed settings for your choice of maximum cooling power at the high fan speed, or super-quiet operation (56 decibels) at the low fan speed.
- Adjustable humidity control combines a high-output compressor with flexible fan cycles to maintain a recommended level of moisture inside your cellar.
- Custom coils generate maximum cooling power inside the cellar.
- Excess condensate is managed with a high-capacity stainless steel condensate pan and 200W electric heating element.
- Commercial-grade Electrofin coating protects the evaporator coils from leaks and corrosion.
- Intuitive LED display panel mounted on the evaporator with digital programmable thermostat is simple and easy to use. The remote thermostat is available as an upgrade.
- Energy-saver mode, quick-chill mode, and auto-defrost cycle provide convenient solutions to common cellar needs.
- Temperature set point range is 47F to 62F when the cooling unit is properly sized.
- Unit operates with minimal vibrations and less noise than comparable units from competitors.
- Audible and visual alarms and maintenance-needed indicator protect the cooling unit and the wine cellar.
- With dual power sources and a 10-foot power cord, the unit can be plugged into a receptacle from either the rear or right side of the cooling unit, providing flexibility for most installations.
- Common dedicated 15-amp circuit is required to power the unit.
- Mounting brackets, included as standard equipment, ensure easy installation.
- Removable steel case provides access to the internal components for servicing and repair.
- CellarPro's 5-Year Standard Warranty, the most thorough in the industry, protects the unit against manufacturing defects.
- An optional Extended Warranty (P/N 31488) is available for additional protection.
- ETL Tested and Certified to rigorous UL Standards for safety.
Configuration
- CellarPro 3400H-ECX cooling units are self-contained, fully-charged units designed to be attached to the ceiling inside the cellar or above the cellar.
- 3400H-ECX units also can be located remotely from the cellar with the addition of one of our cold-side duct packages. Offered with or without insulated flex ducting, in a choice of configurations for low or high humidity conditions, our cold-side duct packages allow these cooling units to be ducted up to 50 equivalent feet away from the cellar and require 8-inch (or greater) ducting from start to finish.
- When calculating equivalent feet, each 90-degree turn counts for 8 feet.
- For remote or inaccessible installations, we offer a remote control display kit that is wired to the cooling unit and allows the digital display to be mounted inside or outside the cellar.
- 3400H cooling units require fresh air intake without interference from the unit's hot air exhaust. If sufficient space does not exist to provide fresh air, you may need our hot-side duct kit.
- The cooling unit should never be exposed to temperatures below 32F.
- A CellarPro cooling unit must always be used in the upright position and should never be operated on its side or upside down.
Additional Info
3492 SENSIBLE BTUH @ 55F
CellarPro's Houdini 3400H-ECX cooling unit 1/2 Ton Nominal is designed specifically for glass-enclosed wine cellars and uses energy-efficient variable-speed EC fans for maximum performance. The 3400H-ECX cooling unit can be placed inside the cellar, atop the cellar, partially installed in the cellar ceiling, or completely remote from the cellar (requires duct kit). Features include:
Shallow height and depth
- Fits shallow glass enclosures
- 13"D x 14 1/2"H
- 46"W
CellarPro's Houdini 3400H-ECX cooling unit can be placed inside the cellar, atop the cellar, partially installed in the cellar ceiling, or completely remote from the cellar (requires duct kit).
Choice of airflows for the cold side
- Intake from the bottom, left, front, or top side
- Exhaust from the bottom, front, or top side
- Air deflector optional
Choice of airflows for hot side
- Intake from the right, front, or top side
- Exhaust from front, rear, or top side
- Air deflector optional
Energy-efficient variable-speed EC fans with independent controls - choose between performance vs noise
Hot side - higher ambient temps require high fan speed
- Low fan speed: 56 dBA / 85F maximum intake temperature
- High fan speed: 61 dBA / 95F maximum intake temperature
Cold side - higher cooling load requires high fan speed
- Low fan speed: 2737 SENSIBLE BTUH @ 55F / 47F lowest achievable cellar temperature
- High fan speed: 3492 SENSIBLE BTUH @55F / 47F lowest achievable cellar temperature on hot, cold, or both sides
Oversized stainless-steel drain pan with 200W heating element
- Included as standard equipment
- No drain line required for properly constructed, airtight cellars
- Optional overflow drain fitting and 8' flexible drain line
Choice of power source
- Side or rear
- Removable 10-ft cord
Bottle probe is included as standard equipment (except when the cooling unit is configured with a Networkable Thermostat upgrade, which is not compatible with the bottle probe)
- Optional remote display
Manuals & Guides
Brand: CellarPro
UPC: 077757358562
Size: 46w x 13d x 14 1/2h (in)
Power/Rating:
115V AC / 60 Hz
Compressor Amps:
- Startup (LRA): 40.0 Amps
- Unit Amp Rating: 10.26 Amps
- Total Watts with Fans on High: 807
- Total Watts with Fans on Low: 791
- Compatible with Dedicated 15-Amp Circuit
BTUH @ 55F:
- Low Fan Speed: 2737 BTUH
- High Fan Speed: 3492 BTUH
- 1/2 Ton Nominal
Sizing Table: Click here to view sizing table
Warranty Resources
- Warranty Overview
- Limited Warranty - 2 Years (Entire System) / 5 Years (Compressor)
- Optional Extended Warranty (sold separately).
Click on one of the following links for more information:
- Spec Sheet
- Owner's Manual
- Cut Sheet: Airflow Cutouts & Dimensions
- Cut Sheet; Control Locations
- Duct Hood Drawings: As Ducted
- Ducting Installation Best Practices
- Configuration Options
- Monthly Operating Cost
WARNING - This product can expose you to chemicals, including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov
Warranty
Warranty Resources
- Warranty Overview
- Limited Warranty - 2 Years (Entire System) / 5 Years (Compressor)
- Optional Extended Warranty (sold separately).
Reviews
Shop By Brands
.png){kind=logo}
