CellarPro 4200VSx Cooling Unit for Exterior Mounting
Designed for wine cellars from 500 to 1500 cubic feet and rated for external applications, the 4200VSx features variable-speed fans with a "high" setting for maximum performance in high-temperature environments and a "low" setting for super- quiet operation.
Additional features include an exterior hood, coated condenser coils, double- powdercoated case and exterior-grade power cord, as well as a thermostatic heating element and 1/2" I.D. drain line, electronic temperature and adjustable humidity control.
CellarPro 4200VSx Wine Cooling Unit (Exterior). CellarPro's 4200VSx 1/3 Ton Nominal wine cellar refrigeration system combines outstanding performance, adjustable humidity control and variable-speed fans for super-quiet operation.
CellarPro's 4200VSx is designed to be installed through-the-wall and can be exposed to exterior environments. The condenser side of these cooling systems are designed to handle environments ranging from -20°F to 115°F. Exposure on the condenser side to temperatures below 2°F requires the addition of our fan cycling switch. The evaporator cannot be exposed to temperatures below 32°F.
The cooling unit can be located remotely and ducted with our front duct kit, and remote control accessories. For exposure to environments below 20°F, our fan cycling switch is advisable.
With our duct kit, the supply and return airflows can be ducted up to 100 equivalent feet (50 feet per duct) without an inline fan, or 200 equivalent feet (100 feet per duct) with an inline fan.
- Startup 42 Amps
- Suggested Compatible with Dedicated 15-Amp Circuit
- Unit Amp Rating 11.5 Amps (high fan speed)
- Total Watts with Evaporator On / Med Fan 960
- Total Watts with Evaporator Off / Med Fan 760
- Height 19.6 in
- Width 14.5 in
- Depth 27.6 in
- Capacity 3938 BTUH @ 55℉
- Weight 123 lbs.
BTUH @ 55℉
- Low Fan Speed 3282
- High Fan Speed 3938
- BTUH @ 55℉ 1/2 Ton Nominal
- Medium Fan Speed 3617
- AMPS Starting 42 Amps
- Electrical Requirements 115V AC / 60Hz
CellarPro 4200VSx Cooling Unit are designed for external installations. CellarPro engineered the 4200VSx cooling unit to provide maximum cooling power and adjustable humidity control for cellars up to 1,000 cubic feet. 4200VSx units are built with high-output Danfoss compressors and oversized coils for maximum performance in high-temperature environments up to 115℉. These units also feature variable-speed fans with a low setting for super-quiet operation when conditions permit. Beginning with the 4200VSi cooling unit for interior installations, we've added to the 4200VSx an exterior weather hood, cold- temperature compressor heater, coated condenser coils, double-powdercoated exterior case, reusable aluminum filter and exterior-grade power cord.
- This unit can be configured to operate in extreme temperature conditions (-20℉ to 115℉). If the unit's location does not provide sufficient room for airflow, you may need to purchase a rear duct kit.
- Dual high-output centrifugal fans come with variable speed settings for your choice of maximum cooling power at the high fan speed, or super-quiet operation (53.7 decibels) at the low fan speed.
- Adjustable humidity control combines a high- output compressor with flexible fan cycles to maintain a recommended level of moisture inside your cellar.
- Extra-large coils generate maximum cooling power inside the cellar.
- Excess condensate is managed with a high-capacity stainless steel drain pan, welded 1/2" drain line and 200W electric heating element with "On/Off" Control.
- Commercial-grade Electrofin coating protects the evaporator coils from leaks and corrosion.
- Intuitive LED display panel with digital programmable thermostat is simple and easy to use.
- Energy-saver mode, quick-chill mode, and auto- defrost cycle provide convenient solutions to common cellar needs.
- Unit operates with minimal vibrations and less noise than comparable units from competitors.
- Audible and visual alarms and maintenance-needed indicator protect the cooling unit and the wine cellar.
- With dual power sources and a 10-foot power cord, the unit can be plugged into a receptacle from either the front or the rear of the cooling unit, providing flexibility for most installations.
- Our easy-access disposable air filter protects the condenser coils and increases the expected useful life of the cooling unit.
- Adjustable mounting brackets, included as standard equipment, ensure easy installation.
- Removable steel case and refrigerant access valve provides access to the internal components for servicing and repair.
- CellarPro's 5-Year Standard Warranty, the most thorough in the industry, protects the unit against manufacturing defects.
- An optional Extended Warranty is available for additional protection.
- ETL Tested and Certified to rigorous UL Standards for safety.
CellarPro 4200 Upgrades/Accessories
Advanced Electronic Thermostat
- Digital LED Display
- Energy-Saver Mode
- Quick-Chill Mode
- Audible and Visual Alarms
- Min/Max Temperature
- Maintenance-Needed Indicator
- Power On/Off Switch
- Auto-Defrost Cycle
- Stainless Steel Drain Pan
- Removable Steel Case
- Replaceable Condenser Air Filter
- Rechargeable Refrigerant Schraeder Valve
- Adjustable Mounting Brackets
- CellarPro 4200VSx units are self-enclosed, fully-charged units designed to be installed through an external wall and sized to fit in between standard wall studs.
- 4200VSx units can be located remotely from the cellar with the addition of one of our front duct packages (however, the entire unit cannot be located in an external environment). Offered with or without insulated flex ducting, in a choice of configurations for low or high humidity conditions, our front duct packages allow these cooling units to be ducted up to 50 equivalent feet away from the cellar and requires 8-inch (or greater) ducting from start to finish.
- When calculating equivalent feet, each 90-degree turn counts for 8 feet.
- For remote or inaccessible installations, we offer a remote control display kit which is wired to the cooling unit and allows the digital display to be mounted inside or outside the cellar.
- 4200VSx units require fresh air intake at the rear of the cooling unit, and are designed to handle environments ranging from .
- For installation in environments below 20℉ down to -20℉, it will be necessary to add our Fan- Cycling Switch.
- The front of the cooling unit should never be exposed to temperatures below 32℉.
- A CellarPro cooling unit must always be used in the upright position, and should never be operated on its side or upside down.
- We ship these units strapped to a pallet via common carrier with curbside delivery. Inside delivery is available for an additional charge.
Manuals & Guides
- CellarPro 4200VSI/VSX Manual - PDF
- CellarPro 4200VSI/VSX Manual - PDF
- CellarPro 4200VSI Cut Sheet
- CellaPro 4200VSI Duct Hood (Front)
- CellaPro 4200VSI Duct Hood (Rear)
- CellaPro Installation Diagram
- CellarPro Cooling System Configuration
CellarPro Manufacturer Warranty
CellarPro Wine Cooling Units 1800 QTL / QT / XT / XTS: For five years from the date of purchase, your CellarPro warranty covers all parts and labor to repair or replace any components in the wine cooling unit that prove to be defective in materials or workmanship.
1800 XT-220V: For two years from the date of purchase, your CellarPro warranty covers all parts and labor to repair or replace any components in the wine cooling unit that prove to be defective in materials or workmanship.
4200VSi / VSx: For five years from the date of purchase, your CellarPro warranty covers the internal compressor if it proves to be defective in materials or workmanship. In addition, for two years from the date of purchase, your CellarPro warranty covers all parts and labor to repair or replace any components the wine cooling unit that prove to be defective in materials or workmanship.
For all products covered by the terms of this warranty, CellarPro will repair or replace the original cooling unit with a new or refurbished cooling unit and, once replaced, the original cooling unit must be returned to CellarPro.
All service provided by CellarPro under the above warranty must be performed by CellarPro or a designated repair facility unless otherwise specified by CellarPro. Purchaser is responsible for shipping the wine cooling unit to and from CellarPro or to and from a designated repair facility, and for removing and reinstalling the wine cooling unit from the wine cellar.
The limited warranty applies only to wine cooling units purchased from the factory or an authorized dealer. Damage caused by others or by any cause beyond the control of CellarPro, shall not be considered defects in material or workmanship and are not covered by the warranty. The limited warranty does not cover any parts or labor to correct any defect caused by negligence, commercial use, accident, or improper use, maintenance, installation, service or repair.
THE REMEDIES DESCRIBED ABOVE FOR EACH WARRANTY ARE THE ONLY ONES, WHICH CELLARPRO WILL PROVIDE, EITHER UNDER THESE WARRANTIES OR UNDER ANY WARRANTY ARISING BY OPERATION OF LAW. CELLARPRO WILL NOT BE RESPONSIBLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES ARISING FROM THE BREACH OF THESE WARRANTIES OR ANY OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other legal rights, which vary from state to state.
To receive parts and/or service contact CellarPro directly by calling (877) 726-8496.
CellarPro VS Series Extended Warranty
CellarPro extended warranty coverage for VS Series cooling units includes five (5) years of in-home coverage for the entire CellarPro cooling system. Designed to augment our standard warranty, our extended warranty increases and enhances coverage as follows:
- Increases the warranty period on the entire system from 2 to 5 years from the date of purchase
- Covers the cost of all parts and labor to repair or replace defective parts during the warranty period
- Covers the cost of in-home service during the warranty period
- Covers shipping costs via standard ground service during the warranty period
Please note the following terms and conditions:
- A deductible of $99 will be charged per incident
- Cleaning the coils and/or replacing the filter on the cooling unit are not covered by the extended warranty
- Scratches, blemishes and other cosmetic damage caused during transit and/or normal wear-and-tear are not covered by the extended warranty
- Issues related to improper installation and/or usage of the products are not covered by the extended warranty
- The extended warranty is available exclusively to residential customers in the continental U.S. for use in non-commercial applications
- The extended warranty is not available for 220V models
- The extended warranty does not cover accessories
- The extended warranty is not transferable