Free Shipping on Hundreds of Products & 30 Years of Custom Built Wine Cellars

CellarPro 2000VSi 220V/50Hz Cooling Unit

$2,500.00
Discounted Price $2,195.00

Shipping

Free Shipping

Description

CellarPro 2000VSi 220V/50Hz Cooling Unit

CellarPro 2000VSi 220V/50Hz Cooling Unit

Description

CellarPro 2000VSi 220V / 50Hz Cooling Unit (CP:27248). CellarPro engineered the low profile 2000VSi cooling unit specifically for installations in wine cellars with limited space.

Just 14 1/8-inches (358mm) wide and 13 1/4-inches (338mm) tall, the 2000VSi cooling unit will fit in between studs and/or above door frames. Dual independent variable-speed fans offer flexibility to trade-off between super-quiet operation vs maximum performance.

All air-cooled refrigeration equipment requires fresh air intake to dissipate the heat generated by the cooling unit. The fresh air intake CANNOT come from the wine cellar space - it must come from space outside the cellar.

Specifications

  • Capacity: 1745 BTUH @ 12.8C
  • Size: 358w x 566d x 338h (mm)
  • Weight: 72 lb
  • Power/Rating: 220V AC / 50 Hz

Compressor Amps:

  • Startup (LRA): 13.5 Amps
  • Unit Amp Rating: 2.39 Amps
  • Total Watts with Fans on High: 320
  • Total Watts with Fans on Low: 304
  • Compatible with Dedicated 15-Amp Circuit

BTUH @ 12.8C:

  • Low Fan Speed: 1581 BTUH
  • High Fan Speed: 1745 BTUH

1/4 Ton Nominal

WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Features

Cold intake and exhaust exit from the front

  • Maximize racking below the cooling unit
  • Better air circulation inside the cellar

Low profile for maximum flexibility

  • Shallow height fits above doors: 338mm H
  • Shallow width fits in between studs: 358mm W

Variable-speed fan inside the cellar

  • 1745 BTUH on high fan speed
  • 1581 BTUH on low fan speed

Variable-speed fan outside the cellar

  • 43C maximum intake temperature / 61.5 dBA on the high fan speed
  • 38C maximum intake temperature / 55.5 dBA on the low fan speed

Cooling unit can be ducted on hot, cold or both sides

Condensate management system

  • Oversized stainless-steel drain pan
  • 100W heating element
  • 12.7mm ID drain line for excess condensate

Choice of power source

  • Front or rear
  • Removable 3m cord

Additional Options

  • Optional remote display
  • Optional bottle probe

*Assumptions for 11.3 cubic meters cellar

  • the cellar is constructed with insulation of R19 or better in all walls and ceiling (ie no glass or uninsulated concrete),
  • the cooling unit is not ducted, a setpoint of 12.8C inside the cellar and
  • ambient temperatures up to 29C outside the cellar

Upgrades

Cold Temperature


Duct Hoods

  • Duct Hood (Hot or Cold Side) and Kit: permits the cooling unit to be located remotely, up to 50 equivalent feet away from the cellar (cold side), and allows you to install the unit in a small space with limited airflow, up to 50 equivalent feet using 6" diameter ducting.
  • Duct Kits are the same as Duct Hoods, and also include 2 x 25-feet of 6-inch insulated (R-6) flex ducting.
  • The duct items above are designed for installation in climate-controlled environments. Choose our High RH duct hood #27108 or kit #27105 for installation in environments that are NOT climate controlled.


Filters & Grills

  • Use our filter and grill guide to find the cooling unit filter or duct filter and/or duct grill that is appropriate for your cooling unit.


Remote Control & Probe

  • Remote Display: lets you place the digital panel wherever you want, whether inside or outside the cellar. Includes 10 feet of wiring.
  • Bottle Probe: this remote thermostat with a 10-foot cord overrides the thermostat on the face of the cooling unit, and allows it to monitor air or liquid temperatures at various locations inside the cellar.
  • Extension cords available in 25-foot and 50-foot lengths.


DID YOU KNOW?
Nobody protects your wine cellar better than CellarPro Cooling Systems! In the event your cooling unit fails and the failed components are covered by our warranty, we'll send a replacement cooling unit to you per the terms of our Replacement Unit Program

CellarPro Replacement Unit Program
If your CellarPro cooling unit fails and the parts that failed are still covered by warranty, we'll send a replacement cooling unit to you, as follows:

  1. Your cooling unit must be registered at CellarPro
  2. Your cooling unit must have been properly sized, installed and maintained
  3. Your cooling unit may not have been permanently modified, damaged or disfigured


Please note:

  • Replacement units are factory-refurbished cooling units with a similar build date as your original unit
  • You are responsible for the shipping cost to send the replacement unit to you and return the original unit to us, and the cost (if any) to remove the original unit and install the replacement unit
  • In order to send a replacement unit, we require a deposit, which will be refunded minus shipping costs upon the return and pending the inspection of the original unit
  • If the original unit failed due to improper intallation or use, the failure is not covered by warranty and we will deduct the cost of the repairs from the refund of your deposit

Additional Information

Intuitive LED display  panel mounted on the evaporator with digital programmable thermostat is simple and easy to use. Remote thermostat is available as an upgrade

Adjustable humidity control combines a high-output compressor with flexible fan cycles to maintain a recommended level of moisture inside your cellar.

Commercial-grade Electrofin coating  protects the evaporator and condenser coils from leaks and corrosion.

Low profile for maximum flexibility

  • Shallow height fits above doors: 338mm H
  • Shallow width fits in between studs: 358mm W

Variable-speed fan inside the cellar

  • 1745 BTUH on high fan speed
  • 1581 BTUH on low fan speed

Variable-speed fan outside the cellar

  • 43C maximum intake temperature / 61.5 dBA on the high fan speed
  • 38C maximum intake temperature / 55.5 dBA on the low fan speed

Condensate management system

  • Oversized stainless-steel drain pan
  • 100W heating element
  • 12.7mm ID drain line for excess condensate

Energy-saver mode, quick-chill mode, and auto-defrost cycle provide convenient solutions to common cellar needs.

Temperature set point range is 8.3C to 16.7C when the cooling unit is properly sized.

Unit operates with minimal vibrations and less noise than comparable units from competitors.

Audible and visual alarms and maintenance-needed indicator protect the cooling unit and the wine cellar.

With dual power sources and a 3-meter power cord, the unit can be plugged into a receptacle from either the front or the rear of the cooling unit, providing flexibility for most installations.

Common dedicated 15-amp circuit is required to power the unit.

Our easy-access air filter protects the condenser coils and increases the expected useful life of the cooling unit.

Adjustable mounting brackets, included as standard equipment, ensure easy installation.

Removable steel case and refrigerant access valve provides access to the internal components for servicing and repair.

CellarPro's 1-Year Standard Warrantythe most thorough in the industry, protects the unit against manufacturing defects.

Warranty

CellarPro Manufacturer Warranty

CellarPro Wine Cooling Units 1800 QTL / QT / XT / XTS: For five years from the date of purchase, your CellarPro warranty covers all parts and labor to repair or replace any components in the wine cooling unit that prove to be defective in materials or workmanship.

1800 XT-220V: For two years from the date of purchase, your CellarPro warranty covers all parts and labor to repair or replace any components in the wine cooling unit that prove to be defective in materials or workmanship.

4200VSi / VSx: For five years from the date of purchase, your CellarPro warranty covers the internal compressor if it proves to be defective in materials or workmanship. In addition, for two years from the date of purchase, your CellarPro warranty covers all parts and labor to repair or replace any components the wine cooling unit that prove to be defective in materials or workmanship.

For all products covered by the terms of this warranty, CellarPro will repair or replace the original cooling unit with a new or refurbished cooling unit and, once replaced, the original cooling unit must be returned to CellarPro.

All service provided by CellarPro under the above warranty must be performed by CellarPro or a designated repair facility unless otherwise specified by CellarPro. Purchaser is responsible for shipping the wine cooling unit to and from CellarPro or to and from a designated repair facility, and for removing and reinstalling the wine cooling unit from the wine cellar.

The limited warranty applies only to wine cooling units purchased from the factory or an authorized dealer. Damage caused by others or by any cause beyond the control of CellarPro, shall not be considered defects in material or workmanship and are not covered by the warranty. The limited warranty does not cover any parts or labor to correct any defect caused by negligence, commercial use, accident, or improper use, maintenance, installation, service or repair.

THE REMEDIES DESCRIBED ABOVE FOR EACH WARRANTY ARE THE ONLY ONES, WHICH CELLARPRO WILL PROVIDE, EITHER UNDER THESE WARRANTIES OR UNDER ANY WARRANTY ARISING BY OPERATION OF LAW. CELLARPRO WILL NOT BE RESPONSIBLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES ARISING FROM THE BREACH OF THESE WARRANTIES OR ANY OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other legal rights, which vary from state to state.

To receive parts and/or service contact CellarPro directly by calling 1.877.726.8496.

CellarPro VS Series Extended Warranty (only for VSi units)

  • Increases the warranty period on the entire system from 2 to 5 years from the date of purchase
  • Covers the cost of all parts and labor to repair or replace defective parts during the warranty period
  • Covers the cost of in-home service during the warranty period
  • Covers shipping costs via standard ground service during the warranty period

Please note the following terms and conditions:

  • A deductible of $99 will be charged per incident
  • Cleaning the coils and/or replacing the filter on the cooling unit are not covered by the extended warranty
  • Scratches, blemishes and other cosmetic damage caused during transit and/or normal wear-and-tear are not covered by the extended warranty
  • Issues related to improper installation and/or usage of the products are not covered by the extended warranty
  • The extended warranty is available exclusively to residential customers in the continental U.S. for use in non-commercial applications
  • The extended warranty is not available for 220V models
  • The extended warranty does not cover accessories
  • The extended warranty is not transferable
Write Your Own Review
You're reviewing:CellarPro 2000VSi 220V/50Hz Cooling Unit
Your Rating

Shop By Brands

Wine Guardian
Breezaire
WhisperKOOL
CellarPro
VintageView
Le Cache

Free Shipping On Select Items

Hundreds of Products with Free Shipping!

Low Price Guarantee

Find a Lower Price? Let us Know!

Made in the USA

Quality you can trust for years to come!

Copyright © 2020 Vintage Cellars LLC, All Rights Reserved.