The WhisperKOOL SC 4000i wine cellar cooling unit is designed to effectively and efficiently cool properly insulated wine cellars up to 1,000 cubic feet in size. As a direct replacement to the WhisperKOOL XLT 4200, the WhisperKOOL SC 4000i is the perfect solution for individuals seeking a reliable wine cellar cooling unit. Like the other models in The WhisperKOOL SC Series, the SC 4000i unit is built for quick and easy installation with through-the-wall installation technology and a single piece mounting bracket, eliminating the need for a support shelf. The SC 4000i is perfect for midsize to large wine cellars as it efficiently cools wine cellars up to 1,000 cubic feet in size. The improved performance and increased durability of the unit comes from its high-end components and all-new housing design. The new Condensation Reduction System increases unit efficiency and reduces electrical usage during operation. This unit has a 30℉ temperature differential. In order to keep your cellar at 55℉, the ℉℉area the unit exhausts into should not exceed 85℉. This makes interior installation ideal for SC series units.
If you need assistance in finding the right WhisperKOOL SC Series Cooling System, call us at (800) 876-8789 for expert advice. We also carry the full line of WhisperKOOL wine cooling systems.
What's included in my shipment?
- Installation Guide
- Self-contained cooling system
- Condensation tube
- Power cord
- Any upgrades purchased with unit
- 2 year parts and labor / 5 year compressor
- Height 15.75 in
- Width 14.25 in
- Depth 17.5 in
- Capacity 1000 cu. ft.
- AMPS Starting 32 A
- AMPS Running 4.9 A
- Electrical Requirements Requires a dedicated 115-volt 20-amp circuit. UL and ETL listed
- Installation Through the wall
- Temp Delta 30℉ temperature differential (maintains proper cellar temperature when exhaust environment does not exceed 85℉)
- Outside Venting Not recommended unless exhaust environment will not exceed 85℉
- Ducting Options ONLY the exhaust side can be ducted using the optional ducting kit
- Weight 67 lbs.
- dBA 60 dBA
WhisperKOOL SC2000i Features:
The WhisperKOOL SC2000i is designed to fit between standard wall studs for simple "through-the-wall" installation. Ideally suited to interior installation, the SC2000i includes an advanced digital controller, dynamic airflow and front or rear power.
- 30℉ temperature differential
- Limited 2 year parts and labor / 5 year compressor warranty
Advanced Digital Controller
Easily view wine temperature, evaporator coil temperature, and condensing coil temperature. Constantly monitors system and environment conditions for efficiency and performance. Emits an audible alert in the event of an alarm situation to keep your environment safe.
No worrying about fluctuating temperature. The unit directly measures the temperature of the wine it is maintaining.
Following the simple philosophy that hot air rises. The fans are designed to project the cooled air in an upward direction. This results in the settling cooled air to exchange with the warm air very effectively.
Efficient Coil Design
Larger, thicker, coils offer increased capacity for cooling the cellar. At the same time oversized coils create more effective heat dissipation on the condenser side of the cooling unit where most problematic issues associated with poor ventilation and thus poor performance occur.
Coated Evaporator Coil
Since the evaporator coil produces condensation during operation, the coil is consistently wet. The coating protects agaisnt any corrosain that could reduce performance over time.
Provide power to the unit from either side of the enviornment. Simply plug it in, flip the switch, and your cooling.
During the condensation process a lot of heat is generated. The unit re-uses this heat to help evaporate the excess condensate which, in turn, helps reduce heat and raise efficiency. Truly a win win.
Single Piece Mounting Bracket
A very sturdy mounting solution. Simplifies the installation process and helps insulate the through-the-wall opening.
Electro-magnetically applied and baked on at high temperatures. The finish is basically one with the unit, inside and out.
UL & ETL Listed
On top of our rigorous testing during development, we proudly carry the UL or ETL mark on all of our products. Products bearing these marks have been independently tested by a Nationally Recognized Testing Laboratory (NTRL) to be in compliance with standards prescribed by the Occupational Safety and Health Administration (OSHA). The marks also indicate that our production site conforms to a range of compliance measures and is subject to periodic follow-up inspections to verify continued conformance.
Though the UL mark is more commonly known, it is not the only Nationally Recognized Testing Laboratory (NRTL) in the US. ETL is also proof of product compliance to North American safety standards, including UL, ANSI, ASTM, and NFPA standards. Both of these marks are assurance that our products are compliant with safety standards, having been tested and certified by a third-party organization.
A limited 2-year parts and labor / 5-year compressor warranty is offered with all of our cooling units/systems at their date of purchase. All warranty claims must be filed directly through WhisperKool customer service (800) 343-9463 (ext. 799). We provide warranty repairs at our manufacturing facility in Stockton, CA or, with prior permission from WhisperKool, by a licensed HVAC/R technician. In the event a unit is not reparable in the field, and is still under warranty, we will cover shipping costs (excluding customs fees and duties).
The limited warranty applies only to wine cooling units purchased from the factory or an authorized dealer. Damage caused by others or beyond the control of WhisperKool, shall not be considered defects in material or workmanship and is not covered by the warranty. The limited warranty does not cover any parts or labor to correct any defect caused by negligence, commercial use, accident, maintenance, installation, service/repair, or improper use.
No Reviews Yet