Split System HS 18000 EC High Static
Split System HS 18000 EC High Static
The High Static (HS) Systems are designed to provide refrigerated air to medium-high temperature spaces. HS evaporators are powerful enough to be installed as far as 25 feet away from the refrigerated room. The chilled air is ducted back into the room, eliminating noise or the inconvenience of an in-room evaporator, which frees up valuable space.
HS evaporators are available in capacities from 1,800 to 20,000 BTU per hour and are used with an R134a refrigerant.
Features
- Remote location produces no noise in the wine cellar
- Occupies no space in the wine cellar
- Provides static pressure for duct runs up to a total of 50'
- Rust-proof and insulated aluminum housing
- Permanently lubricated motor is thermally protected
- Factory installed Automatic Expansion valve ensures constant coil temperature to achieve "Humidity Balance"
- Factory installed Pump-down solenoid valve protects compressor
- No additional control wiring required to thermostat
- All units are pressure tested by the manufacturer to ensure quality
- Factory wired for easy field installation
- ETL certified
Specifications
Evaporator
- Connection Suction (In.) 0.88 in
- Connection Liquid (In.) 0.38 in
- Drain Line (In.) 0.88 in
Condensing Unit
- Height 19 in
- Width 34.1 in
- Length 25 in
- AMPS Running 25.3 A
- Weight 140 lbs.
- Connection Suction (In.) 7/8 S
- Connection Liquid (In.) 3/8 S
Evaporator Dimensions
- Height 26.38 in
- Width 27.88 in
- Length 27.13 in
- Capacity 5000 cu. ft.
- BTU 18,000
- AMPS Running 4.3 A
- Electrical Requirements 115V AC / 60 Hz
- Weight 87 lbs.
Line Set Between Coils
- Suction (In.) 1/2 in
- Liquid (In.) 3/8 in
Upgrades
Optional Upgrades
- Easy Wire Harness Model # SSDC2WH25
- UL Listed Outdoor Cover # SSODE
Manuals & Guides
Split System Installation Guide
Part 1 - Installation Digital Controllers Wiring
Part 2 - Wiring Digital Controllers & Evaporator Coils
Part 3 - Digital Controller Set- Up